Too lazy to turn on your speakers? Too forgetful to turn them off? Look no further, as this project will automate all of your worries away!
Make IoT-based Home Automation using ESP32 Google Assistant Blynk with timer, sensor, and IR remote control relay with real-time feedback.
In this IoT project, I have made a WiFi and IR remote control relay module using an ESP8266 (ESP01) and Arduino with Real-time Feedback.
IoT-based Smart Home Automation using the new Blynk 2.0, ESP32 LDR & DHT11 sensor to control 8 relays from mobile, IR remote & switches.
Make IoT-based Smart Home Automation Using Blynk & ESP32 to control an 8-channel relay module from the IR Remote, manual switch & Wi-Fi.
Turn a light on/off using a relay, Blynk, and an IR Break Beam.
A system using light, soil moisture and humidity sensors to control the water, light and humidity needed by the vertical farm.
Hi! Everyone. This time I show you on how to control your home appliances using your voice.
Garage Door IOT Monitor and Controller, linked to Home Assistant using MQTT. Also, OTA updates make it so I don't need a ladder for updates.
Luminous ball, with clock and thermometer, controlled by Blynk.
The aim of this project is to control and monitor our home appliances through the internet from anywhere in the world.
Make IoT-based Smart Home Automation using Multiple NodeMCU ESP8266 network to control all the home appliances from the pushbuttons & Blynk.
Home Assistant to control switches and monitor room and outdoor condition using Blynk and Google Assistant.
This project focuses on monitoring things over the internet using sensors connected to Arduino with Wi-Fi connection through ESP8266
Make IoT-based Smart Home Automation using Multiple ESP32 & NodeMCU network to control all the home appliances from the Switches & Blynk App
An automatic pellet dispenser designed to feed your dog or cat without lifting a finger
Control the position of a microphone stand remotely through Blynk.
DIY room appliances control over the cloud
Make IoT-based Smart Home Automation using Multiple ESP32 NodeMCU ESP8266 networks to control all the home appliances with Blynk & Switches.
Control your home applications using a mobile phone.
A system that closes my closet door using a servo motor and an Particle Argon
This project shows how to control the hydroponic system as automation and how to monitor the desired data through applications.
First step towards Home automation
In this Internet of Things project, I have shown how to make the IoT-based water pump controller using ESP32 Blynk & float sensor switches.