Main Door Security System with keypad and MLX90614. LEDs are operated by 3 modes (manually + IR + Blynk) & a water level indicator system.
When rat enters the trap, there's no turning back
Make an IoT-based Smart Home with Blynk 2.0 using NodeMCU ESP8266 to control 4 home appliances with real-time feedback & No Wi-Fi control.
This project focuses on monitoring things over the internet using sensors connected to Arduino with Wi-Fi connection through ESP8266
A tutorial for the new Blynk using the MKR 1000 connected over Wi-Fi.
This project will focus on creating your own Blynk Server on Windows PC so you can enjoy unlimited energy and low latency for your projects
An Alexa supported water level indicator that allows you to get status of your current water level in the tank by just asking Amazon Alexa
IoT-based Smart Home Automation using the new Blynk 2.0, ESP32 LDR & DHT11 sensor to control 8 relays from mobile, IR remote & switches.
In this project, I will show you how to make IoT based Pulse Oximeter using ESP32, MAX30100, and Blynk Application.
This tutorial is for making DIY automated driveway gates for relatively cheap using Arduino, ESP8266, Raspberry Pi, and Blynk!
This tutorial shows how to ON/OFF Water pump with Magicbit(ESP32) and Blynk App.
This a multi sensor project where we will interface flame sensor and MQ2 gas sensor with ESP8266 NodeMCU.
This device is an IoT based door lock that can be controlled through the cloud from anywhere around the world on android as well as ios
An alert system that sends a notification to your mobile phone when anyone accesses the safe.
Monitoring basement to make sure humidity does not rise too high and alert to check if dehumidifier bucket is full.
How to make an IoT-based Smart Home with Blynk 2.0 using NodeMCU ESP8266 to control 4 home appliances with real-time feedback.
Automatic irrigation of 3 plants of Pothos, through the use of Wemos (ESP8266).
Hey guys!! How are you ? I am going to do here today is how to control our bike using a smartphone.
Remote control and data analysis of a compressor with the Blynk app and Google Sheets
Clever Globus where main source of light are LED's. All of them are changable and fully programable. It has thermometer and button for start
Here, I am explaining you How to Control your lights, fans or other things using Mobile Phone over Bluetooth. Come Let's See
Real-time visibility and control of water, Nitrogen-Phosphorus-Potassium - from any where an Internet of Things (IoT) based system.
Make IoT-based Smart Home Automation Using Blynk & ESP32 to control an 8-channel relay module from the IR Remote, manual switch & Wi-Fi.
The project is to provide a wearable monitoring system for sewage workers to monitor them while working in the sewage.