A solution to measure noise level and sound pollution in urban areas.
A method in which waste management is automated. An innovative system that will help keep the city clean and healthy.
Check the temperature and humidity of your house, the outside conditions and the weather forecast for today from your phone!
IoT-based Smart Home Automation using the new Blynk 2.0, ESP32 LDR & DHT11 sensor to control 8 relays from mobile, IR remote & switches.
A system for the blind which helps them walk through the street, as and also monitors their location and sends an SOS on button press.
Make IoT-based Home Automation using ESP32 Google Assistant Blynk with timer, sensor, and IR remote control relay with real-time feedback.
In this project, I am going to demonstrate how you can turn on/off LED on idIoTware shield with the help of Blynk app.
A monitoring station for my off-grid greenhouse. Multiple environmental parameters, WiFi, solar-powered, cloud connectivity.
Make IoT-based Home Automation using ESP32 Blynk with the Fan Speed control, sensor, and IR remote control relay with real-time feedback.
Are you interested in controlling your robotic arm using your phone or computer from anywhere in the world?
Make use of Samsung Gear Blynk widget to control LED strip that can light up your room. Thanks to HARDWARIO IoT kit it's easy to make.
Hi! Everyone. This time I show you on how to control your home appliances using your voice.
study and observer environment with this rover
A clock and decorative RGB Led Matrix Colorduino Shield and NodeMCU v3 Board with i2C communication and Blynk for IOTable
My colleague crashed the roof of his car by leaving the garage to early. So I promised him red, amber, green lights in the garage.
A new way to connect sensors! Connect up to five sensors to the particle powered WiSor and obtain real-time data on your mobile phone!
In this Internet of Things project, I have shown how to make the IoT-based water pump controller using ESP32 Blynk & float sensor switches.
Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.
Main Door Security System with keypad and MLX90614. LEDs are operated by 3 modes (manually + IR + Blynk) & a water level indicator system.
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.
First step towards Home automation
Control your heating with this simple device that is easy to modify. You can control your sunblinds or boiler for optimal temperature.
Learn how to use Blynk.
This project controls the power going through an extension cord into a lamp using surrounding light.