Gutters to Gardens is a solar powered rain barrel for remotely or automatically activating a water distribution system for home garden beds.

Control your heating with this simple device that is easy to modify. You can control your sunblinds or boiler for optimal temperature.

Water is essential for life. Save water is saving Earth. So, why not use Blynk Board to save Earth?

A system for the blind which helps them walk through the street, as and also monitors their location and sends an SOS on button press.

How to make IoT based Smart Home Automation Using Blynk & ESP32 to control an 8-channel relay module from the manual switch & smartphone.

Save water, save energy and monitor water consumption with a smart faucet.

A method in which waste management is automated. An innovative system that will help keep the city clean and healthy.

Make an affordable but smart Alarm system for your home, or any of your buildings. It can run up to 2 years just from batteries.

Sending The Data From The LoRa Modules To Blynk Servers Using Ai-Thinker LoRa Modules

Control 8 relays with WiFI + Bluetooth + Manual Switch using ESP32 and Blynk App. Explained with circuit & source code.

Make an IoT-based Smart Home with Blynk 2.0 using NodeMCU ESP8266 to control 4 home appliances with real-time feedback & No Wi-Fi control.

Harsh Weather Monitoring Using Arduino MKR 1300 and Blynk

Use the popular Blynk app to control and change the state of your IoT Cloud Kit through your smartphone.

In Manual Mode, control the relay module from Touch Switch & Blynk App. In Auto Mode, DHT11 & LDR will control the Relays Automatically.

In this project 2 Particle Photon's were used to control an RC Car in real time with the Internet of Things.

A monitoring station for my off-grid greenhouse. Multiple environmental parameters, WiFi, solar-powered, cloud connectivity.

A new way to connect sensors! Connect up to five sensors to the particle powered WiSor and obtain real-time data on your mobile phone!

Control temperature, humidity, CO2, and light with an automated open-source mushroom fruiting chamber using ESP32 and Blynk 2.0.

Make use of Samsung Gear Blynk widget to control LED strip that can light up your room. Thanks to HARDWARIO IoT kit it's easy to make.

Main Door Security System with keypad and MLX90614. LEDs are operated by 3 modes (manually + IR + Blynk) & a water level indicator system.

Hi! Everyone. This time I show you on how to control your home appliances using your voice.

Turn a light on/off using a relay, Blynk, and an IR Break Beam.

IoT-based Smart Home Automation using the new Blynk 2.0, ESP32 LDR & DHT11 sensor to control 8 relays from mobile, IR remote & switches.

This a multi sensor project where we will interface flame sensor and MQ2 gas sensor with ESP8266 NodeMCU.