IoT-based Smart Home Automation using the new Blynk 2.0, ESP32 LDR & DHT11 sensor to control 8 relays from mobile, IR remote & switches.
This a multi sensor project where we will interface flame sensor and MQ2 gas sensor with ESP8266 NodeMCU.
An alert system that sends a notification to your mobile phone when anyone accesses the safe.
Monitoring basement to make sure humidity does not rise too high and alert to check if dehumidifier bucket is full.
How to make an IoT-based Smart Home with Blynk 2.0 using NodeMCU ESP8266 to control 4 home appliances with real-time feedback.
Remote control and data analysis of a compressor with the Blynk app and Google Sheets
Make IoT-based Smart Home Automation Using Blynk & ESP32 to control an 8-channel relay module from the IR Remote, manual switch & Wi-Fi.
Make IoT-based Smart Home Automation using Multiple ESP32 & NodeMCU network to control all the home appliances from the Switches & Blynk App
Make IoT-based Smart Home Automation using Multiple NodeMCU ESP8266 network to control all the home appliances from the pushbuttons & Blynk.
Learn how to use Blynk.
Control 8 relays with WiFI + Bluetooth + Manual Switch using ESP32 and Blynk App. Explained with circuit & source code.
An easy to build simple weather station that connects to your smartphone via WiFi and Blynk.
First step towards Home automation
A monitoring station for my off-grid greenhouse. Multiple environmental parameters, WiFi, solar-powered, cloud connectivity.
How to make IoT based Smart Home Automation Using Blynk & ESP32 to control an 8-channel relay module from the manual switch & smartphone.
IOT Controlled 4Bit NeoPixel Desk lamp is operated using the very simple Blynk platform and Esp8266 based nodemcu.
Have you ever dreamed to turn on or off your Christmas tree lights with just your voice? if the answer is "yes", just read this article.
Sending The Data From The LoRa Modules To Blynk Servers Using Ai-Thinker LoRa Modules
In Manual Mode, control the relay module from Touch Switch & Blynk App. In Auto Mode, DHT11 & LDR will control the Relays Automatically.
The autonomous device will send the vehicle position to the android app with time and will show the location on google maps.
Simple yet effective
Make your own GPS tracker that works without wifi using GSM/GPRS connectivity. We do also have SMS and call feature
Stay safe with the smart tag that reminds you to wear a face mask when you'll go outside and sanitize yourself upon returning home.
Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.