Sending The Data From The LoRa Modules To Blynk Servers Using Ai-Thinker LoRa Modules
A solution to measure noise level and sound pollution in urban areas.
You don't open it, it opens itself. You don't check it, it checks itself
In this project, you can view the temperature and humidity in your room wherever you are.
A monitoring station for my off-grid greenhouse. Multiple environmental parameters, WiFi, solar-powered, cloud connectivity.
The bird house will be outfitted with IOT to track what kind of conditions attracts guests and will tweet you when they are at the door!
IoT-based Smart Home Automation using the new Blynk 2.0, ESP32 LDR & DHT11 sensor to control 8 relays from mobile, IR remote & switches.
A new way to connect sensors! Connect up to five sensors to the particle powered WiSor and obtain real-time data on your mobile phone!
When rat enters the trap, there's no turning back
Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.
IOT application with MKR1000 and ENV shield just 2 components with them we can get (Temp, Lux, Hum, UV) values from everywhere
Make an affordable but smart Alarm system for your home, or any of your buildings. It can run up to 2 years just from batteries.
Make IoT-based Home Automation using ESP32 Blynk with the Fan Speed control, sensor, and IR remote control relay with real-time feedback.
The device utilizes the Pyroelectric Infrared Sensor to automatically power down the electric power to the tools at the work bench if idle.
You will never have to find your light switch again in the night, just walk into your bathroom and lights are on.
Turn on a fan automatically with a Particle Photon using temperature sensing and the Blynk app.
Learn how to set up your own weather station, monitor environmental parameters and share your recordings with online community!
Fun activity for kids - let's learn how IoT can contribute to energy efficiency of a house!
Put back yard water pump on the internet.
self-sufficient with battery operation and multi-wifi support
A simple bee monitoring system that uses sensors and AI vision to facilitate bee care
Using Ultrasonic sensor and Esp-32 to measure distance and obtaining result on blynk cloud.
Arduino Opla, PIR sensor and sound sensor with two way communication through Blynk to smart phone
We are going to learn how to build a Fire alarm using NodeMCU and Blynk App.