Want to pass something over to a friend without getting up? Lazy Ferrari is there to help you!
Control temperature, humidity, CO2, and light with an automated open-source mushroom fruiting chamber using ESP32 and Blynk 2.0.
Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.
It will start your water motor automatically and stop automatically. Also showing how much fill with water in cm.
My colleague crashed the roof of his car by leaving the garage to early. So I promised him red, amber, green lights in the garage.
The best way to save electricity from using your light bulbs is to open your blinds and let the sun shine through!
On-board data acquisition for mountain bike air suspension pressures.
37 children die every year from being left inside of a hot car. The SafeTiBaby project hopes to fix that.
When we press the button or touch the sensor, the temperature is displayed on 2 LCDs and Blynk mobile app.
IOT application with MKR1000 and ENV shield just 2 components with them we can get (Temp, Lux, Hum, UV) values from everywhere
A combination of 3 different clocks in one frame.
How to realize an alarm clock controlled by a smartphone, using simple raw materials and an Arduino-based ESP32.
First step towards Home automation
Control your heating with this simple device that is easy to modify. You can control your sunblinds or boiler for optimal temperature.
Tired of getting off your couch to unlock your door for your roommate? Forget to lock your door on your way to class? Say no more…
This project controls the power going through an extension cord into a lamp using surrounding light.
Learn how to use Blynk.
This project uses Blynk (Esp8266), a 3-D printed hand, and two servos to make a remote controlled Halloween hand gag.
Used in a coffee roastery as part of a larger system, but can easily be adapted for control needs. A lot of control in a small form factor.
Learn how to use Blynk app with an ESP8266.
DIY room appliances control over the cloud
How to use a SparkFun Blynk Board to create a wireless, battery-driven remote control for most digital cameras.
Make an affordable but smart Alarm system for your home, or any of your buildings. It can run up to 2 years just from batteries.