Control temperature, humidity, CO2, and light with an automated open-source mushroom fruiting chamber using ESP32 and Blynk 2.0.
Single channel LoRaWAN gateway using Seeed studio Wio-E5 Module, ESP8266, And Blynk.
Based on sensor data open/close window via actuator and turn on/off fans. App via Blynk platform. Entirely solar powered.
Garage Door IOT Monitor and Controller, linked to Home Assistant using MQTT. Also, OTA updates make it so I don't need a ladder for updates.
Control and Monitor your ESP32 Dev Board with the Blynk IoT Cloud. Guide for Blynk 1.0 (legacy) and Blynk 2.0 API uses
Smart step counter shoe using ESP8266, Infrared Sensor and a LiPo battery.
Save time by knowing whether the Faculty is in his chamber or not.
Waterman is a device in form of a box which will check the contamination level of water and also the availability of water in the pipeline.
In this project, we will learn about the application of Arduino IoT Cloud with AR D1. Recently the Arduino Community launched their IoT plat
It's difficult to make communication with ESP-01 module but today I'll show how to do it in the simplest way.
Harsh Weather Monitoring Using Arduino MKR 1300 and Blynk
I wanted to create a device that could spin spools of thread when I pressed a button so I could just cut the thread and continue sewing.
This health band can assist old people in their daily lives, leaving the family stress free!
A IoT system which helps you control your home lights from anywhere in the world in real time.
An IoT smart mailbox for securely receiving parcels and getting notification on app without being present at home.
Whole house energy monitor that monitors a split phase 120/240 service and publishes to blynk.
This is a second tutorial for making DIY automated driveway gates for relatively cheap using Arduino, ESP32, Raspberry Pi, and Blynk!
This tutorial guides you through how to make a laser gun that shoots up to 50 ft and is compatible with Nerf LaserX!
Make IoT-based Home Automation using ESP32 Blynk with the Fan Speed control, sensor, and IR remote control relay with real-time feedback.
I spent my last weekend creating an app for my router. System and network charts, stats, notifications, WiFi control, and more!
Put back yard water pump on the internet.
An easy to build simple weather station that connects to your smartphone via WiFi and Blynk.
If an accident or any gas or smoke leakage is detected, it notifies through call and through Blynk app.
A simple bee monitoring system that uses sensors and AI vision to facilitate bee care