Real-time visibility and control of water, Nitrogen-Phosphorus-Potassium - from any where an Internet of Things (IoT) based system.
Smart Garden is a plant environmental monitoring system.
A system that tells you about the parking slots of an area.
A lamp which changes color according to the tweets of people.
Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.
A BBQ thermometer with 4 separate probes. Control settings, monitor progress, and get notifications on your phone.
saving water smartly.
Self-stabilizing spoon for Parkinson's sufferers who have difficulty eating on their own because of serious tremors.
This battery charger monitor uses an OLED display & Blynk to show you its charge current, bus voltage, load voltage & elapsed time.
Waterman is a device in form of a box which will check the contamination level of water and also the availability of water in the pipeline.
This project creates a way to monitor water usage, to reduce water costs.
Remotely we control our home with MKR1000 and IOT of Blynk. We can manage the boiler, the 'anti-theft irrigation, open the Automatic Gate.
This project brings a pre-IoT audio receiver up to speed using Blynk and a TI Launchpad to send IR signals through WiFi from an iPhone.
A IoT system which helps you control your home lights from anywhere in the world in real time.
Save time by knowing whether the Faculty is in his chamber or not.
Control home appliances over internet. This IOT project done using Node MCU ESP8266 and BLYNK app. Control devices from anywhere.
Create a shield of control with multiple sensors to create visual and sound notifications in case of danger.
Garage Door IOT Monitor and Controller, using Blynk App on your cell phone. Also OTA updates and MQTT to Home Assistant.
Open, close and monitor a garage door opener with a smart phone using a Particle Photon and the Blynk application.
A complete functional unit for monitoring and controlling the internal environmental conditions of a greenhouse (with code and schematics).
This is a project for measuring the AC current of a device plugged into the outlet and data feedback using Blynk with OTA.
This Robot cleans floors very efficiently !!:)
Control any high voltage (240V, 15A) load whilst monitoring two external sensors and current drawn by load. No additional PSU needed.
To assist the doctors to track their patients during COVID-19