Using Google Assistant and Amazon Alexa, we can control our home's electronics gadgets (up to 240 v). Also with smartphone application.
Domotic unit to control temperature, humidity and time inside a greenhouse.
I think I have bitten off more than I can chew. I have no idea what I am doing. I am a smart person, I should be able to figure this out.
Hii Friends Today I'll Show You How To Make Simple DIY Eclipse Wall Light Using ESP8266 SO LET'S Make It🔥
Have you bought a cheap analog LED strip set in the hardware store? Bring this set with a Particle Photon and a relay to light up!
This project is a wireless drone that can be controlled using the Blynk app on your phone. It has an autonomous mode that avoids objects.
I created a house with a light that gradually turns on a light if it is dark and an alarm connected to the door.
I wanted to make a robot. However, I could only make a foot because my money ran out.
IoT with your robot at one place and your phone another, both connected via internet.
The robot car is operating with Nodemcu esp32 controller and the command is given by the Blynk android application in a mobile phone using t
Micro Gear Motor based small robot powered by a Wemos D32 Pro and controlled by Blynk app.
Running a local copy of Blynk server.
Monitor your workspace or your home with this simple solution that sends all the data by radio so you can work with them.
Calculate distance to a certain object using an ultrasonic sensor. It can be used for car distance alerts, security systems, etc.
A sense2goL pulse board is used to make a blind spot detector that can be mounted on the back of a bicycle to alert the rider from behind.
How To make Simple Home Automation System
Here is a project to read the LinkIt One's battery voltage through Blynk.
I made a remote notepad with an ePaper display and Blynk.
There are many uses for servos now-a-days! There are even more uses for WiFi servos!
A Raspberry Pi Zero WH, a nova SDS011 particulate sensor and an Si7021 temp/humidity sensor using a JHD162A LCD and Blynk
It is a lamp or desk lamp that is controlled by your phone for when you need the light to get to your bed, but not once you are in bed.
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.
The LinkIt One Board is awesome, but it's even more awesome with Blynk.
Protect your home from the flood with this simple device. It will send you the notification when there is some leak in a bathroom or kitchen