A first introduction to using Hover Labs Beam.
This is a very simple project, were the main idea is to explore how to control servos via internet using NodeMCU and Blynk.
The idea is to upgrade my rover to be controlled by a Blynk app in my mobile. The Blynk is talking to my Arduino UNO using Bluetooth HC06.
We will learn how to capture temperature data, upload it to internet with a NodeMCU and monitor it on a Smart device using a Blynk app.
In this article, we will introduce you to controlling real world devices using the Blynk system.
Control an LED brightness or color through Blynk App with ARMA IoT shield for Arduino Uno.
A water-resistant temperature sensor is suitable to signal the reaching of the core temperature of the meat during the grilling time.
IoT with your robot at one place and your phone another, both connected via internet.
The LinkIt One Board is awesome, but it's even more awesome with Blynk.
A collection of labs for the Texas Instruments + UIUC workshop. Spin a servo from the cloud with an MSP432 and Blynk!
Learn how to gain remote control of your DIY constructions with the easy to use Blynk interface.
Use Blynk to send a command to Onion Omega2 and use virtual pins to write on your console.
Don't let your BBC micro:bit collect dust! Here is how to use it with Blynk and Arduino IDE.
Have you bought a cheap analog LED strip set in the hardware store? Bring this set with a Particle Photon and a relay to light up!
A cool RC Car that you can control with the touch of your fingers right from your own phone.
Use the Blynk app to control the RGB LED, the onboard LED, and the LED expansion from your phone.
This system sends alerts to your smartphone when there is movement in the house, also allows monitoring the temperature of the place.
Wanted to replace the standard remote control unit for a garage door with an app on my iPhone.
This is an ESP8266-based Neopixel dashboard: it can show current time, a custom message and have up to 41 preset effects.
I made train controlled by Blynk and BLE board. I can easily using Blynk!!
Control your Robot from anywhere using the ARMA IoT shield for UNO and the Blynk App which provides the user interface.
I made LED EyeBall controlled by Blynk using Adafruit Feather 32u4 Bluefruit LE. I can easily using Blynk!!
An example of Blynk app linking the mobile to the Arduino 101 using Bluetooth Low Energy BLE.
When you are out of your home for Christmas Holiday you can visualize the Temp and Humidity values by your smartwatch using ArduinoMKR1000.