Yulee Rover is an Arduino Uno powered robot.
I think I have bitten off more than I can chew. I have no idea what I am doing. I am a smart person, I should be able to figure this out.
Have you bought a cheap analog LED strip set in the hardware store? Bring this set with a Particle Photon and a relay to light up!
I created a house with a light that gradually turns on a light if it is dark and an alarm connected to the door.
CaRo is a cable robot that enables easy and cost-effective entry into programming and robotics.
I created a raspberry pi remote-controlled car using Blynk.
IoT with your robot at one place and your phone another, both connected via internet.
Running a local copy of Blynk server.
Calculate distance to a certain object using an ultrasonic sensor. It can be used for car distance alerts, security systems, etc.
Domotic unit to control temperature, humidity and time inside a greenhouse.
There are many uses for servos now-a-days! There are even more uses for WiFi servos!
This project is a wireless drone that can be controlled using the Blynk app on your phone. It has an autonomous mode that avoids objects.
It is a lamp or desk lamp that is controlled by your phone for when you need the light to get to your bed, but not once you are in bed.
The LinkIt One Board is awesome, but it's even more awesome with Blynk.
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.
I wanted to make a robot. However, I could only make a foot because my money ran out.
Here is a project to read the LinkIt One's battery voltage through Blynk.
You can control your home light or any appliances from anywhere and anyplace
Monitor your workspace or your home with this simple solution that sends all the data by radio so you can work with them.
I made a remote notepad with an ePaper display and Blynk.
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation / IoT project
In this project, I'm using a Kortex A1 IoT-sensor microcontroller in order to monitor temperature/humidity/pressure/altitude via WiFi.
Protect your home from the flood with this simple device. It will send you the notification when there is some leak in a bathroom or kitchen
Human detection Security System Using IOT