It is a lamp or desk lamp that is controlled by your phone for when you need the light to get to your bed, but not once you are in bed.
Here is a project to read the LinkIt One's battery voltage through Blynk.
Domotic unit to control temperature, humidity and time inside a greenhouse.
I wanted to make a robot. However, I could only make a foot because my money ran out.
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation / IoT project
Using Arduino UNO GSM SIM800 SIM network to remotely control any Arduino with Blynk app.
In this project, I'm using a Kortex A1 IoT-sensor microcontroller in order to monitor temperature/humidity/pressure/altitude via WiFi.
I made a remote notepad with an ePaper display and Blynk.
By using your phone you can make is so that you can change your temperature of your old stick thermostat from anywhere.
This project is a wireless drone that can be controlled using the Blynk app on your phone. It has an autonomous mode that avoids objects.
Monitor your workspace or your home with this simple solution that sends all the data by radio so you can work with them.
Protect your home from the flood with this simple device. It will send you the notification when there is some leak in a bathroom or kitchen
A cereal (or whatever you'd like it to be) dispenser, that dispenses anything from the manual button, or from your phone.
Too lazy to walk and turn something on Want to cheaply control your home power usage while out Well here's a button (and app) to solve it!
Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.
Have your eggs always perfectly boiled just as you like them. With this solution that is simple and customizable.
This is a short tutorial for connecting and setting up the MH-Z14A carbon dioxide sensor in Arduino w/OTA updates and Blynk.