Control any 5V element using Blynk and ☒CHIPS. This project sounds a Piezo Buzzer from my phone.
If you have ever wondered how to get started in the IoT (Internet of Things) world, this is the tutorial for you!
Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.
This guide shows you how to add Blynk Board support to the Arduino IDE.
Many projects like this involve requiring a WiFi shield, or a Bluetooth Module. However, thanks to Blynk, all that is still possible.
How to make your room intelligent easily.
This project is about an IoT setup for a TV RGB backlight that can be controlled by Blynk App.
LCD Display and LoT Blynk App of Temperature, Humidity and Smoke Sensors
A simple IoT experiment using an ESPectro Core v3 and connecting it to Blynk, Cayenne, Dweet, Freeboard & Thinger.
You can control your home light or any appliances from anywhere and anyplace
A first introduction to using Hover Labs Beam.
A simple Internet of Things (IoT) experiment using an ESP32 Development Board & shared access Blynk.
In this tutorial, we will learn how to interface Servo motor with the Raspberry pi module and operate it with the Blynk app. and This proje
Human detection Security System Using IOT
Control an LED brightness or color through Blynk App with ARMA IoT shield for Arduino Uno.
Using Google Assistant and Amazon Alexa, we can control our home's electronics gadgets (up to 240 v). Also with smartphone application.
A simple IoT test using a Blynk project to control & monitor 2 ESP8266 boards (NodeMCU & Wemos D1).
Yulee Rover is an Arduino Uno powered robot.
I think I have bitten off more than I can chew. I have no idea what I am doing. I am a smart person, I should be able to figure this out.
Ultrasonic sensor using blynk
Have you bought a cheap analog LED strip set in the hardware store? Bring this set with a Particle Photon and a relay to light up!
I created a house with a light that gradually turns on a light if it is dark and an alarm connected to the door.
Domotic unit to control temperature, humidity and time inside a greenhouse.
This tutorial is about making a temperature and humidity wifi node with Blynk.