This contribution is intended for all men who are supposed to bring the paper waste out of their 3rd floor apartment.
Control an on-board LED.
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.
Many projects like this involve requiring a WiFi shield, or a Bluetooth Module. However, thanks to Blynk, all that is still possible.
How to make your room intelligent easily.
This guide shows you how to add Blynk Board support to the Arduino IDE.
A simple IoT experiment using an ESPectro Core v3 and connecting it to Blynk, Cayenne, Dweet, Freeboard & Thinger.
Control any 5V element using Blynk and ☒CHIPS. This project sounds a Piezo Buzzer from my phone.
If you have ever wondered how to get started in the IoT (Internet of Things) world, this is the tutorial for you!
A first introduction to using Hover Labs Beam.
Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.
In this tutorial you will learn how to set up a weather station based on ESP32, and how to monitor its readings remotely, via the Blynk app.
A simple Internet of Things (IoT) experiment using an ESP32 Development Board & shared access Blynk.
Control an LED brightness or color through Blynk App with ARMA IoT shield for Arduino Uno.
Using Google Assistant and Amazon Alexa, we can control our home's electronics gadgets (up to 240 v). Also with smartphone application.
A simple IoT test using a Blynk project to control & monitor 2 ESP8266 boards (NodeMCU & Wemos D1).
Yulee Rover is an Arduino Uno powered robot.
I think I have bitten off more than I can chew. I have no idea what I am doing. I am a smart person, I should be able to figure this out.
Make your own IoT based home/office security system using the Nodemcu ESP8266 Wifi module, PIR Sensor and Blynk application.
Have you bought a cheap analog LED strip set in the hardware store? Bring this set with a Particle Photon and a relay to light up!
I created a house with a light that gradually turns on a light if it is dark and an alarm connected to the door.
A RGB and CheerLights-lamp in American-Football Design.
CaRo is a cable robot that enables easy and cost-effective entry into programming and robotics.
I created a raspberry pi remote-controlled car using Blynk.