Drive a 8x32 LED dot matrix module with a particle photon to display real-time weather or messages sent via the Blynk app.
The easiest way to add WiFi control to your project!
A water-resistant temperature sensor is suitable to signal the reaching of the core temperature of the meat during the grilling time.
Temboo is very easy to automate the IoT with Arduno YUN, in combination with Blynk and Dropbox to store pictures. All is free and easy.
Develop mobile application on BLYNK, and monitor temperature on your mobile.
Monitor the conditions (Hum, Temp, Soil Moisture & Light) in which your plant in growing & take necessary actions from anywhere, anytime.
It is possible that ultraviolet rays emitted by the sun deactivate the virus in a few seconds. The Beach UV meter measures UV and tweets.
Make your own IoT based home/office security system using the Nodemcu ESP8266 Wifi module, PIR Sensor and Blynk application.
Using UIFlow and Blynk to complete the interaction experiment
This is the next step with an Particle Photon and softAP integration: cucumbers go online.
A garage door and a climate sensor, which is connected to wifi. It sends phone notifications when the door opens or closes.
I made train controlled by Blynk and BLE board. I can easily using Blynk!!
This is an ESP8266-based Neopixel dashboard: it can show current time, a custom message and have up to 41 preset effects.
A smart Christmas tree controlled by your smartphone using Blynk and ESP8266.
In this post we will be going to look how to make your own CCTV using ESP32-CAM board. It will be cost lower than CCTV cameras. You can fix
It is an IOT based door lock system which consists of a NodeMCU board. It is interfaced with a Sg90 which shows open and close of a door lock
I changed ordinary boring desk lamp into Blynk controlled device :)
Through this tutorial I made fire alarm notification System Using Iot technology. wherever you are in the world you can get the notification
In this tutorial you will learn how to set up a weather station based on ESP32, and how to monitor its readings remotely, via the Blynk app.
A simple home automation project allows you to control home appliance from anywhere. Blynk provides very good and attractive interface.
This tutorial is about making a Smart Plug with ESP8266 & Blynk for anything you want to turn on or off automatically.
I created a raspberry pi remote-controlled car using Blynk.
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.
This contribution is intended for all men who are supposed to bring the paper waste out of their 3rd floor apartment.