A water-resistant temperature sensor is suitable to signal the reaching of the core temperature of the meat during the grilling time.
A simple Power Meter you can use to measure 0-26V & up to 3.2A. Add to any project to monitor voltage, current, power and energy used.
Fidget Spinners are everywhere - one of the challenges is to get the fastest spinning and longest running Spinner...build a sensor!
Don't let your BBC micro:bit collect dust! Here is how to use it with Blynk and Arduino IDE.
In this simple tutorial, we will explore how to control a servo motor over the internet, using a smartphone.
A first introduction to using Hover Labs Beam.
Have you bought a cheap analog LED strip set in the hardware store? Bring this set with a Particle Photon and a relay to light up!
In this article, we will introduce you to controlling real world devices using the Blynk system.
Check the current conditions: light, temperature, humidity on your smartphone.
Adapt your home automation project from our March 2017 workshop to be controlled through BLE using the Blynk app on your phone.
Analyse concrete, metal, wood structures for bends and angles and alerts if they have deviated from the original position.
At my age you have to get up at night and get tired on the way to the bathroom. Using a PIR-Sensor to trigger light on!
The idea is to upgrade my rover to be controlled by a Blynk app in my mobile. The Blynk is talking to my Arduino UNO using Bluetooth HC06.
An example of Blynk app linking the mobile to the Arduino 101 using Bluetooth Low Energy BLE.
Wanted to replace the standard remote control unit for a garage door with an app on my iPhone.
This project demonstrates how to use the various features of Blynk like Buttons, LED, LCD, Virtual Display with Onion Omega2p.
Temboo is very easy to automate the IoT with Arduno YUN, in combination with Blynk and Dropbox to store pictures. All is free and easy.
Use Blynk to send a command to Onion Omega2 and use virtual pins to write on your console.
Use a LattePanda and Blynk to make a simple but cool IoT control unit.
This is an ESP8266-based Neopixel dashboard: it can show current time, a custom message and have up to 41 preset effects.
This system sends alerts to your smartphone when there is movement in the house, also allows monitoring the temperature of the place.
An I2C interface with Blynk.
Learn how to gain remote control of your DIY constructions with the easy to use Blynk interface.
When you are out of your home for Christmas Holiday you can visualize the Temp and Humidity values by your smartwatch using ArduinoMKR1000.