Setup a home temperature monitoring system on your phone within minutes! Literally just copy and paste!
CaRo is a cable robot that enables easy and cost-effective entry into programming and robotics.
I made a remote notepad with an ePaper display and Blynk.
Making a smart garage model from the toy building using XOD and Blynk.
This project shows how to connect a DHT11 sensor with a NodeMCU and check temperature/humidity.
This is a simple project for those who want to make a relay module using one BC547 transistor.
A home automation project for light use with an ESP8266 and 5V relay.
A simple Internet of Things experiment, using an Arduino MKR1000 board to control two LEDs and monitor a potentiometer, via Blynk app.
Calculate distance to a certain object using an ultrasonic sensor. It can be used for car distance alerts, security systems, etc.
In this tutorial, we will learn how to control an Arduino with the help of Blynk App and ESP8266 WiFi Module. This project is quite simple!
Control your robot from a Wi-Fi network using an ESP8266 Wemos D1, Arduino IDE and Blynk App!
The best way to NodeMCU GPS tracker Blynk app In IOT platform.
Say goodbye to ice cubes and automatically cool your pet's water dish.
Today i show you how to interface DHT sensor Value in Blynk Apps use NodeMcu8266 .
In this I show you how to control LEDs using Blynk app In IoT platform.
The simplest project in Arduino that one could learn is to control the on-board LED via Blynk app.
My aim is to minimize the loss of electricity there is when people forget to switch off their fans or lights, through smart home solution.
Develop mobile application on BLYNK, and monitor temperature on your mobile.
Monitor the conditions (Hum, Temp, Soil Moisture & Light) in which your plant in growing & take necessary actions from anywhere, anytime.
Calculate distance to a certain object using an ultrasonic sensor. It can be used for car distance alerts, security systems etc.
A simple device that turns the lights on when the user approaches home.
Burn everything written in the Blynk terminal to an SD card in seconds, anywhere the user is located.
By using your phone you can make is so that you can change your temperature of your old stick thermostat from anywhere.
A cereal (or whatever you'd like it to be) dispenser, that dispenses anything from the manual button, or from your phone.