I created a raspberry pi remote-controlled car using Blynk.

Human detection Security System Using IOT

Through this tutorial I made fire alarm notification System Using Iot technology. wherever you are in the world you can get the notification

Fun activity for students - set up your weather station, sent it up in the air, and monitor the recordings!

In this tutorial you will learn how to set up a weather station based on ESP32, and how to monitor its readings remotely, via the Blynk app.

Have your eggs always perfectly boiled just as you like them. With this solution that is simple and customizable.

Protect your home from the flood with this simple device. It will send you the notification when there is some leak in a bathroom or kitchen

Monitor your workspace or your home with this simple solution that sends all the data by radio so you can work with them.

Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.

Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.

I work a lot in my garage or in the garden, so it happens pretty often that I just don't hear my doorbell. So I made a smart one.

If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide

This is a short tutorial for connecting and setting up the MH-Z14A carbon dioxide sensor in Arduino w/OTA updates and Blynk.

Control an on-board LED.

This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.

If you have ever wondered how to get started in the IoT (Internet of Things) world, this is the tutorial for you!

A smart iot outlet controlled by Google assistant, learn how to connect blynk with ifttt

Make a simplified table trash bin and can.

Domotic unit to control temperature, humidity and time inside a greenhouse.

Setup a home temperature monitoring system on your phone within minutes! Literally just copy and paste!

I made a remote notepad with an ePaper display and Blynk.

Making a smart garage model from the toy building using XOD and Blynk.

This project shows how to connect a DHT11 sensor with a NodeMCU and check temperature/humidity.

This is a simple project for those who want to make a relay module using one BC547 transistor.