We will learn how to capture temperature data, upload it to internet with a NodeMCU and monitor it on a Smart device using a Blynk app.

In this I show you how to control LEDs using Blynk app In IoT platform.

Cloud connected, fully automated, smart indoor herb harvesting using Seeed Studio's Wio Terminal and Blynk app.

Burn everything written in the Blynk terminal to an SD card in seconds, anywhere the user is located.

Control your LED on Arduino UNO using Blynk App.

I work a lot in my garage or in the garden, so it happens pretty often that I just don't hear my doorbell. So I made a smart one.

Use the Blynk app to control the RGB LED, the onboard LED, and the LED expansion from your phone.

With this project, we will be able to water our plant automatically and monitor it from our smartphone.

I made train controlled by Blynk and BLE board. I can easily using Blynk!!

Get notified on your smartphone/smartwatch when your mail is delivered and when it is collected. New version.

Collecting multiple data from multiple sensors connected to the same 1-wire bus and monitoring them from the internet with Blynk.

Monitor your blood oxygen level with this ESP32 based Oximeter. This Oximeter costs less than 10$.

This walks you through the Blynk boar'd's firmware.

Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.

Make a simplified table trash bin and can.

Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.

This is a simple project for those who want to make a relay module using one BC547 transistor.

An I2C interface with Blynk.

Monitor your workspace or your home with this simple solution that sends all the data by radio so you can work with them.

The simplest project in Arduino that one could learn is to control the on-board LED via Blynk app.

This is a project about a robot made for people who feel lonely.

How easy is to do the link between my Arduino Yun and one mobile using free soft Blynk.

This is a very simple project, were the main idea is to explore how to control servos via internet using NodeMCU and Blynk.

This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.