Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.
Build a Car that you can control from your Browser. Either make it run only when connected locally on your network, or over Cloud (Internet)
A magnetic sensor sends notification to the phone when you forget to close the fridge door.
You can control your home light or any appliances from anywhere and anyplace
If you have ever wondered how to get started in the IoT (Internet of Things) world, this is the tutorial for you!
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.
Many projects like this involve requiring a WiFi shield, or a Bluetooth Module. However, thanks to Blynk, all that is still possible.
This guide shows you how to add Blynk Board support to the Arduino IDE.
How to make your room intelligent easily.
Looking for a new Smart Desk RGB Lamp? Build your own with WisBlock and Blynk!
Monitor your workspace or your home with this simple solution that sends all the data by radio so you can work with them.
This ESP32 based use of automatic watering can help take care of plants.
Monitoring temperature using Blynk (DHT11)
Servo using blynk and NodeMCU
Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.
We are going to build a simple IoT dog feeder that costs less than $30 and can be controlled remotely via an IoT software!
Protect your home from the flood with this simple device. It will send you the notification when there is some leak in a bathroom or kitchen
It is a lamp or desk lamp that is controlled by your phone for when you need the light to get to your bed, but not once you are in bed.
Simple and full instruction for the beginner!
Have your eggs always perfectly boiled just as you like them. With this solution that is simple and customizable.
Smart parking using blynk
In this project, I'm using a Kortex A1 IoT-sensor microcontroller in order to monitor temperature/humidity/pressure/altitude via WiFi.
A cereal (or whatever you'd like it to be) dispenser, that dispenses anything from the manual button, or from your phone.