For now, you can control Servo with Blynk.
Led With Blynk In Easy Ways
Now you can control a LED from your smartphone easily
It is an IOT based door lock system which consists of a NodeMCU board. It is interfaced with a Sg90 which shows open and close of a door lock
This is an iot based smart energy meter that I made it can monitor power, current, watt hour and unit energy consumed by the device
A smart iot outlet controlled by Google assistant, learn how to connect blynk with ifttt
In this tutorial, we will learn how to interface Servo motor with the Raspberry pi module and operate it with the Blynk app. and This proje
This project is about an IoT setup for a TV RGB backlight that can be controlled by Blynk App.
You can easily water your plants using IOT with the Soil moisture sensor
You can control your home light or any appliances from anywhere and anyplace
Using UIFlow and Blynk to complete the interaction experiment
A simple device that turns the lights on when the user approaches home.
Read sensor data and toggle LEDs with the Blynk mobile app and the TI CC3200 LaunchPad
This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.
If you have ever wondered how to get started in the IoT (Internet of Things) world, this is the tutorial for you!
With this project, we will be able to water our plant automatically and monitor it from our smartphone.
Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.
Monitor the conditions (Hum, Temp, Soil Moisture & Light) in which your plant in growing & take necessary actions from anywhere, anytime.
Setup a home temperature monitoring system on your phone within minutes! Literally just copy and paste!
Use a $9 GSM module & the Hologram network to remotely control any Arduino with Blynk App.
Create your Blynk mobile app to monitor your garden and activate the irrigation.
The easiest way to add WiFi control to your project!
An I2C interface with Blynk.
A simple project to learn IoT by connecting a DHT11 temperature and humidity sensor with WeMos D1 Mini and interfacing the data to Blynk.