Display information or variables on a LCD available at BLYNK app using IOT.
Adjust your blinds from the comfort of your seat without having to go through the effort of standing up.
When you are out of your home for Christmas Holiday you can visualize the Temp and Humidity values by your smartwatch using ArduinoMKR1000.
I made LED EyeBall controlled by Blynk using Adafruit Feather 32u4 Bluefruit LE. I can easily using Blynk!!
If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide
Temboo is very easy to automate the IoT with Arduno YUN, in combination with Blynk and Dropbox to store pictures. All is free and easy.
I work a lot in my garage or in the garden, so it happens pretty often that I just don't hear my doorbell. So I made a smart one.
With this project, we will be able to water our plant automatically and monitor it from our smartphone.
Monitor the conditions (Hum, Temp, Soil Moisture & Light) in which your plant in growing & take necessary actions from anywhere, anytime.
A smart iot outlet controlled by Google assistant, learn how to connect blynk with ifttt
This is a simple project for those who want to make a relay module using one BC547 transistor.
I changed ordinary boring desk lamp into Blynk controlled device :)
How to make your room intelligent easily.
This guide shows you how to add Blynk Board support to the Arduino IDE.
I created a house with a light that gradually turns on a light if it is dark and an alarm connected to the door.
Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.
Control an on-board LED.
Using Arduino UNO GSM SIM800 SIM network to remotely control any Arduino with Blynk app. Share schematic + gerber file + BomList
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation/IoT project.
It is a lamp or desk lamp that is controlled by your phone for when you need the light to get to your bed, but not once you are in bed.
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation / IoT project
In this project, I'm using a Kortex A1 IoT-sensor microcontroller in order to monitor temperature/humidity/pressure/altitude via WiFi.
By using your phone you can make is so that you can change your temperature of your old stick thermostat from anywhere.
Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.