In this post we will be going to look how to make your own CCTV using ESP32-CAM board. It will be cost lower than CCTV cameras. You can fix
Setup a home temperature monitoring system on your phone within minutes! Literally just copy and paste!
Monitor the conditions (Hum, Temp, Soil Moisture & Light) in which your plant in growing & take necessary actions from anywhere, anytime.
This is an iot based smart energy meter that I made it can monitor power, current, watt hour and unit energy consumed by the device
The easiest way to add WiFi control to your project!
Many projects like this involve requiring a WiFi shield, or a Bluetooth Module. However, thanks to Blynk, all that is still possible.
Easy way to unlock and Lock door with Blynk app. Also, I will add code for to Lock & Unlock door by RFID and fingerprint sensor. 3 in 1.
Cheap and easy way to feed the dog from anywhere via your phone.
Today i show you how to interface DHT sensor Value in Blynk Apps use NodeMcu8266 .
This project is about an IoT setup for a TV RGB backlight that can be controlled by Blynk App.
Make your own IoT based home/office security system using the Nodemcu ESP8266 Wifi module, PIR Sensor and Blynk application.
Monitoring temperature using Blynk (DHT11)
Micro Gear Motor based small robot powered by a Wemos D32 Pro and controlled by Blynk app.
A simple project to learn IoT by connecting a DHT11 temperature and humidity sensor with WeMos D1 Mini and interfacing the data to Blynk.
You can control your home light or any appliances from anywhere and anyplace
It is a lamp or desk lamp that is controlled by your phone for when you need the light to get to your bed, but not once you are in bed.
We show how to connect Pico to WiFi while maintaining low power and running it directly on AAA batteries.
A garage door and a climate sensor, which is connected to wifi. It sends phone notifications when the door opens or closes.
In this video I'm gong to show you how to make Esp8266 based IOT Car using your blynk IOT cloud platform
A simple Internet of Things experiment, using an Arduino MKR1000 board to control two LEDs and monitor a potentiometer, via Blynk app.
A smart iot outlet controlled by Google assistant, learn how to connect blynk with ifttt
How to make your room intelligent easily.
In this project, I'm using a Kortex A1 IoT-sensor microcontroller in order to monitor temperature/humidity/pressure/altitude via WiFi.
Read temperature, humidity and air quality control using DHT22 and MQ - 135 and monitoring with Blynk using ESP8266.