With this tutorial, we will learn how to handle this fantastic little device, the NodeMCU ESP-12E and Blynk platform.
Protect your valuables with a puzzle!
Control your robot from a Wi-Fi network using an ESP8266 Wemos D1, Arduino IDE and Blynk App!
Making a smart garage model from the toy building using XOD and Blynk.
Use a $9 GSM module & the Hologram network to remotely control any Arduino with Blynk App.
Here is how to make an Arduino/Genuino 101 Bluetooth Low Energy thermometer with TMP102 and Blynk.
Analyse concrete, metal, wood structures for bends and angles and alerts if they have deviated from the original position.
Create your Blynk mobile app to monitor your garden and activate the irrigation.
Monitor your living room temperature remotely using DHT-11, ESP8266 WiFi module, and Blynk.
A home automation project for light use with an ESP8266 and 5V relay.
Adjust your blinds from the comfort of your seat without having to go through the effort of standing up.
A simple Power Meter you can use to measure 0-26V & up to 3.2A. Add to any project to monitor voltage, current, power and energy used.
A weather station based on ESP8266 +blynk Anytime you want to visualize a precise place you just clic on the app and see due to this
This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.
If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide
This project shows how to connect a DHT11 sensor with a NodeMCU and check temperature/humidity.
Be the master, control everything with your smart phone.
In this simple tutorial, we will explore how to control a servo motor over the internet, using a smartphone.
Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.
A collection of labs for the Texas Instruments + UIUC workshop. Spin a servo from the cloud with an MSP432 and Blynk!
I made LED EyeBall controlled by Blynk using Adafruit Feather 32u4 Bluefruit LE. I can easily using Blynk!!
Get an extractor fan to automatically turn on when the humidity in the bathroom exceeded a certain level and then turn off again.
Display sensor values (DHT11 in example) on the Smartphone using Blynk App.
In this I show you how to control LEDs using Blynk app In IoT platform.
