Control your lighting and other appliances from your smartphone using Blynk app and voice control using google assistant IFTT webhook.

How to Read Multiple Analog Values Using One Analog Pin

A simple home automation project allows you to control home appliance from anywhere. Blynk provides very good and attractive interface.

This is an iot based smart energy meter that I made it can monitor power, current, watt hour and unit energy consumed by the device

Hi guys it's me Rohan Barnwal welcome back with another project in this project I demonstrate you how to create notification based door bell

This Preventive measure reduces the spread of infection to a large extent. A Must Watch!

This project is about an IoT setup for a TV RGB backlight that can be controlled by Blynk App.

You can easily water your plants using IOT with the Soil moisture sensor

This tutorial is about making a Smart Plug with ESP8266 & Blynk for anything you want to turn on or off automatically.

This tutorial is about making a temperature and humidity wifi node with Blynk.

Make your own IoT based home/office security system using the Nodemcu ESP8266 Wifi module, PIR Sensor and Blynk application.

You can control your home light or any appliances from anywhere and anyplace

Human detection Security System Using IOT

Through this tutorial I made fire alarm notification System Using Iot technology. wherever you are in the world you can get the notification

Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.

Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.

I work a lot in my garage or in the garden, so it happens pretty often that I just don't hear my doorbell. So I made a smart one.

If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide

Control an on-board LED.

This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.

A smart iot outlet controlled by Google assistant, learn how to connect blynk with ifttt

Make a simplified table trash bin and can.

Making a smart garage model from the toy building using XOD and Blynk.

This project shows how to connect a DHT11 sensor with a NodeMCU and check temperature/humidity.