The easiest way to add WiFi control to your project!
A simple project to learn IoT by connecting a DHT11 temperature and humidity sensor with WeMos D1 Mini and interfacing the data to Blynk.
I made a remote notepad with an ePaper display and Blynk.
Using Google Assistant and Amazon Alexa, we can control our home's electronics gadgets (up to 240 v). Also with smartphone application.
Making a smart garage model from the toy building using XOD and Blynk.
This project shows how to connect a DHT11 sensor with a NodeMCU and check temperature/humidity.
Here's an introduction to control a Nema 17 stepper motor with the help of the Adafruit TB6612 OR A4988 Stepstick OR PHPoC PES-2405 R2
This is a simple project for those who want to make a relay module using one BC547 transistor.
A home automation project for light use with an ESP8266 and 5V relay.
A simple Internet of Things experiment, using an Arduino MKR1000 board to control two LEDs and monitor a potentiometer, via Blynk app.
Calculate distance to a certain object using an ultrasonic sensor. It can be used for car distance alerts, security systems, etc.
Easy way to unlock and Lock door with Blynk app. Also, I will add code for to Lock & Unlock door by RFID and fingerprint sensor. 3 in 1.
In this tutorial, we will learn how to control an Arduino with the help of Blynk App and ESP8266 WiFi Module. This project is quite simple!
Monitor your living room temperature remotely using DHT-11, ESP8266 WiFi module, and Blynk.
Control your robot from a Wi-Fi network using an ESP8266 Wemos D1, Arduino IDE and Blynk App!
The best way to NodeMCU GPS tracker Blynk app In IOT platform.
Use a $9 GSM module & the Hologram network to remotely control any Arduino with Blynk App.
Say goodbye to ice cubes and automatically cool your pet's water dish.
In this project, I'm using a Kortex A1 IoT-sensor microcontroller in order to monitor temperature/humidity/pressure/altitude via WiFi.
Today i show you how to interface DHT sensor Value in Blynk Apps use NodeMcu8266 .
In this I show you how to control LEDs using Blynk app In IoT platform.
Get an extractor fan to automatically turn on when the humidity in the bathroom exceeded a certain level and then turn off again.
The simplest project in Arduino that one could learn is to control the on-board LED via Blynk app.
My aim is to minimize the loss of electricity there is when people forget to switch off their fans or lights, through smart home solution.