You can easily water your plants using IOT with the Soil moisture sensor
Monitor the conditions (Hum, Temp, Soil Moisture & Light) in which your plant in growing & take necessary actions from anywhere, anytime.
Make your own IoT based home/office security system using the Nodemcu ESP8266 Wifi module, PIR Sensor and Blynk application.
A garage door and a climate sensor, which is connected to wifi. It sends phone notifications when the door opens or closes.
Adapt your home automation project from our March 2017 workshop to be controlled through BLE using the Blynk app on your phone.
I changed ordinary boring desk lamp into Blynk controlled device :)
In this post we will be going to look how to make your own CCTV using ESP32-CAM board. It will be cost lower than CCTV cameras. You can fix
Through this tutorial I made fire alarm notification System Using Iot technology. wherever you are in the world you can get the notification
Control your lighting and other appliances from your smartphone using Blynk app and voice control using google assistant IFTT webhook.
A simple home automation project allows you to control home appliance from anywhere. Blynk provides very good and attractive interface.
This tutorial is about making a Smart Plug with ESP8266 & Blynk for anything you want to turn on or off automatically.
Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.
This project is about an IoT setup for a TV RGB backlight that can be controlled by Blynk App.
You can control your home light or any appliances from anywhere and anyplace
Human detection Security System Using IOT
LCD Display and LoT Blynk App of Temperature, Humidity and Smoke Sensors
This tutorial is about making a temperature and humidity wifi node with Blynk.
Hii Friends Today I'll Show You How To Make Simple DIY Eclipse Wall Light Using ESP8266 SO LET'S Make It🔥
How To make Simple Home Automation System
It is a lamp or desk lamp that is controlled by your phone for when you need the light to get to your bed, but not once you are in bed.
Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.
This project was part of the Lane Tech HS Physical Computing Lab course. I created this project as part of the Home Automation / IoT project
Micro Gear Motor based small robot powered by a Wemos D32 Pro and controlled by Blynk app.
Coding is so FUN! you can make a smart parking in your house!