It is an IOT based door lock system which consists of a NodeMCU board. It is interfaced with a Sg90 which shows open and close of a door lock
In this tutorial, we will learn how to interface Servo motor with the Raspberry pi module and operate it with the Blynk app. and This proje
This project is about an IoT setup for a TV RGB backlight that can be controlled by Blynk App.
You can easily water your plants using IOT with the Soil moisture sensor
Using UIFlow and Blynk to complete the interaction experiment
Make your own IoT based home/office security system using the Nodemcu ESP8266 Wifi module, PIR Sensor and Blynk application.
You can control your home light or any appliances from anywhere and anyplace
Have your eggs always perfectly boiled just as you like them. With this solution that is simple and customizable.
Protect your home from the flood with this simple device. It will send you the notification when there is some leak in a bathroom or kitchen
Monitor your workspace or your home with this simple solution that sends all the data by radio so you can work with them.
Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.
Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.
I work a lot in my garage or in the garden, so it happens pretty often that I just don't hear my doorbell. So I made a smart one.
This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.
If you have ever wondered how to get started in the IoT (Internet of Things) world, this is the tutorial for you!
A smart iot outlet controlled by Google assistant, learn how to connect blynk with ifttt
Setup a home temperature monitoring system on your phone within minutes! Literally just copy and paste!
Making a smart garage model from the toy building using XOD and Blynk.
A simple Internet of Things experiment, using an Arduino MKR1000 board to control two LEDs and monitor a potentiometer, via Blynk app.
Control your robot from a Wi-Fi network using an ESP8266 Wemos D1, Arduino IDE and Blynk App!
Today i show you how to interface DHT sensor Value in Blynk Apps use NodeMcu8266 .
In this I show you how to control LEDs using Blynk app In IoT platform.
Monitor the conditions (Hum, Temp, Soil Moisture & Light) in which your plant in growing & take necessary actions from anywhere, anytime.
A simple device that turns the lights on when the user approaches home.