This Preventive measure reduces the spread of infection to a large extent. A Must Watch!
This project is about an IoT setup for a TV RGB backlight that can be controlled by Blynk App.
You can easily water your plants using IOT with the Soil moisture sensor
This tutorial is about making a Smart Plug with ESP8266 & Blynk for anything you want to turn on or off automatically.
This tutorial is about making a temperature and humidity wifi node with Blynk.
Make your own IoT based home/office security system using the Nodemcu ESP8266 Wifi module, PIR Sensor and Blynk application.
You can control your home light or any appliances from anywhere and anyplace
Human detection Security System Using IOT
Through this tutorial I made fire alarm notification System Using Iot technology. wherever you are in the world you can get the notification
Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.
Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.
I work a lot in my garage or in the garden, so it happens pretty often that I just don't hear my doorbell. So I made a smart one.
If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide
Control an on-board LED.
This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.
A smart iot outlet controlled by Google assistant, learn how to connect blynk with ifttt
Make a simplified table trash bin and can.
Making a smart garage model from the toy building using XOD and Blynk.
This project shows how to connect a DHT11 sensor with a NodeMCU and check temperature/humidity.
This is a simple project for those who want to make a relay module using one BC547 transistor.
A home automation project for light use with an ESP8266 and 5V relay.
In this tutorial, we will learn how to control an Arduino with the help of Blynk App and ESP8266 WiFi Module. This project is quite simple!
In this I show you how to control LEDs using Blynk app In IoT platform.
Monitor the conditions (Hum, Temp, Soil Moisture & Light) in which your plant in growing & take necessary actions from anywhere, anytime.