In this tutorial, we will learn how to control an Arduino with the help of Blynk App and ESP8266 WiFi Module. This project is quite simple!
A simple device that turns the lights on when the user approaches home.
Every time a movement is detected by the sensor, a message is sent to a smartphone anywhere in the world!
Connecting an electrical bulb with Arduino Uno and accessing it from Android Phone.
Making a smart garage model from the toy building using XOD and Blynk.
A home automation project for light use with an ESP8266 and 5V relay.
Adjust your blinds from the comfort of your seat without having to go through the effort of standing up.
This project shows how to connect a DHT11 sensor with a NodeMCU and check temperature/humidity.
If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide
In this I show you how to control LEDs using Blynk app In IoT platform.
How to make a smart greenhouse using Arduino and Node MCU for IoT
I made LED EyeBall controlled by Blynk using Adafruit Feather 32u4 Bluefruit LE. I can easily using Blynk!!
Burn everything written in the Blynk terminal to an SD card in seconds, anywhere the user is located.
This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.
Get notified on your smartphone/smartwatch when your mail is delivered and when it is collected. New version.
I work a lot in my garage or in the garden, so it happens pretty often that I just don't hear my doorbell. So I made a smart one.
Overfreezing you fridge is not good for your food and power saving, with this fridge monitor, you will always know the temperature in there.
Stop the mold from spreading in your house or office with this simple device. Just put it into the moldy room and watch the humidity.
This is a simple project for those who want to make a relay module using one BC547 transistor.
Make a simplified table trash bin and can.
Monitor the conditions (Hum, Temp, Soil Moisture & Light) in which your plant in growing & take necessary actions from anywhere, anytime.
Adapt your home automation project from our March 2017 workshop to be controlled through BLE using the Blynk app on your phone.
In this post we will be going to look how to make your own CCTV using ESP32-CAM board. It will be cost lower than CCTV cameras. You can fix
This project is about an IoT setup for a TV RGB backlight that can be controlled by Blynk App.