An ultimate tutorial for beginners on how to connect and use an ESP8266 via Arduino and program it to blink an LED using the Blynk app.
In this tutorial, we will learn how to control an Arduino with the help of Blynk App and ESP8266 WiFi Module. This project is quite simple!
Never miss anyone at your door! A system that notifies your phone and email whenever someone presses the doorbell.
Interfacing ultrasonic sensor with NodeMCU and displaying the distance in the Blynk app.
Here's an introduction to control a Nema 17 stepper motor with the help of the Adafruit TB6612 OR A4988 Stepstick OR PHPoC PES-2405 R2
This project shows how to connect a DHT11 sensor with a NodeMCU and check temperature/humidity.
Build an Android or iOS app for your hardware with no coding!
A project that displays the temperature and humidity of a room on your mobile in real time.
Control your LED on Arduino UNO using Blynk App.
Protect your valuables with a puzzle!
An internet-connected, servo-driven deadbolt actuator that can be operated remotely using a smartphone.
This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.
A simple device that turns the lights on when the user approaches home.
Control your Robot from anywhere using the ARMA IoT shield for UNO and the Blynk App which provides the user interface.
This project shows the integration of hardware with mobile application. The user can control equipment from his phone over the internet.
Automating a chicken coop with sensors and actors, using an Arduino MKR1000 and the Blynk internet dashboard.
Create your Blynk mobile app to monitor your garden and activate the irrigation.
My aim is to minimize the loss of electricity there is when people forget to switch off their fans or lights, through smart home solution.
Simplest wifi car controlled by your smartphone using NodeMcu esp8266 and Blynk.
Monitor your living room temperature remotely using DHT-11, ESP8266 WiFi module, and Blynk.
Every time a movement is detected by the sensor, a message is sent to a smartphone anywhere in the world!
Learn how to gain remote control of your DIY constructions with the easy to use Blynk interface.
A simple project to learn IoT by connecting a DHT11 temperature and humidity sensor with WeMos D1 Mini and interfacing the data to Blynk.
Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.