A simple device that turns the lights on when the user approaches home.
Read sensor data and toggle LEDs with the Blynk mobile app and the TI CC3200 LaunchPad
Use a $9 GSM module & the Hologram network to remotely control any Arduino with Blynk App.
Simply click a button to receive your phone's geolocation.
Setup a home temperature monitoring system on your phone within minutes! Literally just copy and paste!
With this tutorial, we will learn how to handle this fantastic little device, the NodeMCU ESP-12E and Blynk platform.
Making a smart garage model from the toy building using XOD and Blynk.
A simple project to learn IoT by connecting a DHT11 temperature and humidity sensor with WeMos D1 Mini and interfacing the data to Blynk.
This is a cool IoT project for beginners using NodeMCU and Blynk app. Through this project, you can control 4 devices in your home.
Easy way to unlock and Lock door with Blynk app. Also, I will add code for to Lock & Unlock door by RFID and fingerprint sensor. 3 in 1.
The robot car is operating with Nodemcu esp32 controller and the command is given by the Blynk android application in a mobile phone using t
Control your robot from a Wi-Fi network using an ESP8266 Wemos D1, Arduino IDE and Blynk App!
Cheap and easy way to feed the dog from anywhere via your phone.
Control your Robot from anywhere using the ARMA IoT shield for UNO and the Blynk App which provides the user interface.
Create your Blynk mobile app to monitor your garden and activate the irrigation.
Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.
In this I show you how to control LEDs using Blynk app In IoT platform.
An I2C interface with Blynk.
Burn everything written in the Blynk terminal to an SD card in seconds, anywhere the user is located.
Read temperature, humidity and air quality control using DHT22 and MQ - 135 and monitoring with Blynk using ESP8266.
Really? A pitch? What is this?
Display information or variables on a LCD available at BLYNK app using IOT.
Today i show you how to interface DHT sensor Value in Blynk Apps use NodeMcu8266 .
A simple Internet of Things experiment, using an Arduino MKR1000 board to control two LEDs and monitor a potentiometer, via Blynk app.