We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.
Using PixyCam and Intel Arduino 101 to drive this rover. Easy Robotic Vision system using PixyCam, rover reacts to the ball using Pan/Tilt.
An ultimate tutorial for beginners on how to connect and use an ESP8266 via Arduino and program it to blink an LED using the Blynk app.
An outdoor rover, capable of autonomous navigation (using GPS and sonar sensors) or controlled over WiFi.
Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.
Control your Robot from anywhere using the ARMA IoT shield for UNO and the Blynk App which provides the user interface.
Check in on a loved one instantly and have fun!
Control your robot from a Wi-Fi network using an ESP8266 Wemos D1, Arduino IDE and Blynk App!
Clean your yard from your smartphone or preset a job for AYSE to follow!
If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide
This is a robot who can see, listen, talk, and move freely to help us do many activities, much like a friend.
Getting Started Guide for using Blynk with the Arduino IDE for controlling a small robot chassis using a Bluetooth phone or tablet.
This is a very simple project, were the main idea is to explore how to control servos via internet using NodeMCU and Blynk.
Controlling a robot via WiFi, using Arduino and Blynk application.
I wanted to make a robot. However, I could only make a foot because my money ran out.
This project uses Blynk (Esp8266), a 3-D printed hand, and two servos to make a remote controlled Halloween hand gag.
Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.
CaRo is a cable robot that enables easy and cost-effective entry into programming and robotics.
MovingLight is a moveable NeoPixel LED light with two stepper motors and is controlled via Bluetooth and Blynk app.
Yulee Rover is an Arduino Uno powered robot.
This project will show you how to adapt a SMARS bot for control with an iPhone accelerometers, Blynk, Wemos D1 Mini, over WiFi.
Building robots shouldn't be hard or laborious. All you need is an Arduino 101 and a Sparkfun chassis.
IoT with your robot at one place and your phone another, both connected via internet.
Use a front-facing light to attack your opponent's side-mounted photoresistor. When your hit points drop to 0, you are dead!