How to Read Multiple Analog Values Using One Analog Pin
Used in a coffee roastery as part of a larger system, but can easily be adapted for control needs. A lot of control in a small form factor.
A simple home automation project allows you to control home appliance from anywhere. Blynk provides very good and attractive interface.
Hi, my name is Rohan Barnwal welcome back in this project I teach you how you can create a device which help us in stop spreading of Corona
Hi guys it's me Rohan Barnwal welcome back with another project in this project I teach you how to create notification based door bell
This Preventive measure reduces the spread of infection to a large extent. A Must Watch!
Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.
Home Automation NodeMcu ESP8266 | Arduino | Smartphone Controlled
You can easily water your plants using IOT with the Soil moisture sensor
Hi! Everyone. This time I show you on how to control your home appliances using your voice.
study and observer environment with this rover
This is CDVR Robot - "Crowd Deterrent Vigilance Robot" to control Covid-19 situation
I created a raspberry pi remote-controlled car using Blynk.
Human detection Security System Using IOT
Through this tutorial I made fire alarm notification System Using Iot technology. wherever you are in the world you can get the notification
Control any high voltage (240V, 15A) load whilst monitoring two external sensors and current drawn by load. No additional PSU needed.
If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide
This project will show you how to adapt a SMARS bot for control with an iPhone accelerometers, Blynk, Wemos D1 Mini, over WiFi.
Control an external LED light from anywhere in the world using the ESP8266. The GPIO pin serves as an output source to the LED.
An ultimate tutorial for beginners on how to connect and use an ESP8266 via Arduino and program it to blink an LED using the Blynk app.
I wanted to make a robot. However, I could only make a foot because my money ran out.
CaRo is a cable robot that enables easy and cost-effective entry into programming and robotics.
MovingLight is a moveable NeoPixel LED light with two stepper motors and is controlled via Bluetooth and Blynk app.
Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.