Naufal Faqiih Ashshiddiq
Published © GPL3+

Servo with Blynk

Controlling a servo with wireless

BeginnerShowcase (no instructions)1 hour226
Servo with Blynk

Things used in this project

Hardware components

NodeMCU ESP8266 Breakout Board
NodeMCU ESP8266 Breakout Board
×1
Female/Female Jumper Wires
Female/Female Jumper Wires
×1
SG90 Micro-servo motor
SG90 Micro-servo motor
×1
Micro-USB to USB Cable (Generic)
Micro-USB to USB Cable (Generic)
×1

Software apps and online services

Arduino IDE
Arduino IDE
Blynk
Blynk

Story

Read more

Code

Controlled servo with Blynk

C/C++
#include <ESP8266WiFi.h>
#include <BlynkSimpleEsp8266.h>
#include <Servo.h>

#define BLYNK_PRINT Serial


Servo servo;
char auth[] = "Blynk token";
char ssid[] = "your ssid";
char pswd[] = "your pass";

void setup() {
 Serial.begin(9600);
 Blynk.begin(auth,ssid,pswd);
 servo.attach(15); //D4

}

void loop() {
Blynk.run();
}

BLYNK_WRITE(V1) {
  servo.write(param.asInt());
}

Credits

Naufal Faqiih Ashshiddiq

Naufal Faqiih Ashshiddiq

5 projects • 1 follower

Comments

Add projectSign up / Login