Konstantin Dimitrov
Published © GPL3+

Arduino/Genuino 101 BLE Thermometer With TMP102 and Blynk

Here is how to make an Arduino/Genuino 101 Bluetooth Low Energy thermometer with TMP102 and Blynk.

BeginnerFull instructions provided9 minutes9,183
Arduino/Genuino 101 BLE Thermometer With TMP102 and Blynk

Things used in this project

Hardware components

Arduino 101 & Genuino 101
Arduino 101 & Genuino 101
×1
SparkFun Digital Temperature Sensor Breakout - TMP102
SparkFun Digital Temperature Sensor Breakout - TMP102
×1
Breadboard (generic)
Breadboard (generic)
×1
Jumper wires (generic)
Jumper wires (generic)
×1

Software apps and online services

Arduino IDE
Arduino IDE
Arduino Web Editor
Arduino Web Editor
Blynk
Blynk

Story

Read more

Code

101_BLE_Thermometer_TMP102.ino

Arduino
/**************************************************************
 * Blynk is a platform with iOS and Android apps to control
 * Arduino, Raspberry Pi and the likes over the Internet.
 * You can easily build graphic interfaces for all your
 * projects by simply dragging and dropping widgets.
 *
 * This sketch was created by Konstatin Dimitrov 
 * under GNU v3.0 Licence 
 * 
 * Based on example scetch: Arduino_101_BLE
 ***************************************************
 *
 * This scetch shows how to send data from TMP102 with 
 * Arduino/Genuino 101 BLE to Blynk.
 *
 * Note: This requires CurieBLE library
 *   from http://librarymanager/all#CurieBLE
 *
 * NOTE: BLE support is in beta!
 *
 **************************************************************/

//#define BLYNK_USE_DIRECT_CONNECT

#define BLYNK_PRINT Serial

#include <Wire.h>
#include <BlynkSimpleCurieBLE.h>
#include <CurieBLE.h>

// You should get Auth Token in the Blynk App.
// Go to the Project Settings (nut icon).
char auth[] = "AUTH_TOKEN";

//TMP102 I2C (TWI) address in HEX
int tmp102Address = 0x48;

BLEPeripheral  blePeripheral;

void setup() {
  Serial.begin(9600);
  Wire.begin();
  delay(1000);
  
  blePeripheral.setLocalName("BLE Thermometer");
  blePeripheral.setDeviceName("BLE Thermometer");
  blePeripheral.setAppearance(384);

  Blynk.begin(blePeripheral, auth);

  blePeripheral.begin();
  
  Serial.println("Waiting for connections...");
}

//Temperature readings in Celsius on V0
BLYNK_READ(0)
  {
  float celsius = getTemperature();
  Blynk.virtualWrite(0, celsius);
  }
//Temperature readings in Fahrenheit on V1
BLYNK_READ(1)
  {
  float celsius = getTemperature();
  float fahrenheit = (1.8 * celsius) + 32;
  Blynk.virtualWrite(1, fahrenheit);
  }

BLYNK_READ(2)
  {
  float celsius = getTemperature();
  float kelvin = 273.15 + celsius;
  Blynk.virtualWrite(2, kelvin);
  }
  
void loop() {
  Blynk.run();
  blePeripheral.poll();
  }

float getTemperature(){
  Wire.requestFrom(tmp102Address,2); 

  byte MSB = Wire.read();
  byte LSB = Wire.read();

  //it's a 12bit int, using two's compliment for negative
  int TemperatureSum = ((MSB << 8) | LSB) >> 4; 

  float celsius = TemperatureSum*0.0625;
   if (celsius > 128)
  { 
  celsius = celsius - 256; // for negative temperatures
  }
  else
    celsius;
  return celsius;
}

Credits

Konstantin Dimitrov

Konstantin Dimitrov

11 projects • 140 followers

Comments

Add projectSign up / Login