Embedded-DIY-Tech
Published © MIT

IoT Based Patient Health Monitoring System Using Esp32

How to make a IoT Based Patient Health Monitoring System How to create a human health monitoring system

AdvancedFull instructions provided999
IoT Based Patient Health Monitoring System Using Esp32

Things used in this project

Hardware components

FireBeetle ESP32 IOT Microcontroller (Supports Wi-Fi & Bluetooth)
DFRobot FireBeetle ESP32 IOT Microcontroller (Supports Wi-Fi & Bluetooth)
×1
SparkFun Single Lead Heart Rate Monitor - AD8232
SparkFun Single Lead Heart Rate Monitor - AD8232
×1
DHT11 Temperature & Humidity Sensor (4 pins)
DHT11 Temperature & Humidity Sensor (4 pins)
×1
MAXREFDES117# Heart-Rate and Pulse-Oximetry Monitor Development Platform
Maxim Integrated MAXREFDES117# Heart-Rate and Pulse-Oximetry Monitor Development Platform
×1
SparkFun Atmospheric Sensor Breakout - BME280
SparkFun Atmospheric Sensor Breakout - BME280
×1
0.96" OLED 64x128 Display Module
ElectroPeak 0.96" OLED 64x128 Display Module
×1

Software apps and online services

Arduino IDE
Arduino IDE
Blynk
Blynk

Hand tools and fabrication machines

Soldering iron (generic)
Soldering iron (generic)
Solder Wire, Lead Free
Solder Wire, Lead Free
10 Pc. Jumper Wire Kit, 5 cm Long
10 Pc. Jumper Wire Kit, 5 cm Long

Story

Read more

Credits

Embedded-DIY-Tech

Embedded-DIY-Tech

7 projects • 16 followers
I'm creating an industrial project. Creating Final year projects for engineering and Science. I am working as an embedded developer.

Comments

Add projectSign up / Login