IoT-based Smart Home Automation using the new Blynk 2.0, ESP32 LDR & DHT11 sensor to control 8 relays from mobile, IR remote & switches.
A small project designed using Node MCU and Blynk app to enable using the Google Assistant to switch on/off home appliances.
Cloud connected, fully automated, smart indoor herb harvesting using Seeed Studio's Wio Terminal and Blynk app.
It's smart... It's automatic... it's a humidifier... It's a Charizard!
Lock your door from anywhere
In this project, I will show you how to make IoT based Pulse Oximeter using ESP32, MAX30100, and Blynk Application.
This a multi sensor project where we will interface flame sensor and MQ2 gas sensor with ESP8266 NodeMCU.
This project turn disables the door lock for an authorised user by face detection.
An alert system that sends a notification to your mobile phone when anyone accesses the safe.
Monitoring basement to make sure humidity does not rise too high and alert to check if dehumidifier bucket is full.
How to make an IoT-based Smart Home with Blynk 2.0 using NodeMCU ESP8266 to control 4 home appliances with real-time feedback.
An integrated development platform developed for learning and solution designing relates to electronics, IoT, robotics, and coding
Remote control and data analysis of a compressor with the Blynk app and Google Sheets
Blynk, is it the savour of microprocessors everywhere? Well at first look this seems to show promise, so let's take it for a spin and see.
Make IoT-based Smart Home Automation Using Blynk & ESP32 to control an 8-channel relay module from the IR Remote, manual switch & Wi-Fi.
The project is to provide a wearable monitoring system for sewage workers to monitor them while working in the sewage.
Make IoT-based Smart Home Automation using Multiple ESP32 & NodeMCU network to control all the home appliances from the Switches & Blynk App
Find KEYs, WALLET, BAGs by ringing them using google assistant
We show how to connect Pico to WiFi while maintaining low power and running it directly on AAA batteries.
Make IoT-based Smart Home Automation using Multiple NodeMCU ESP8266 network to control all the home appliances from the pushbuttons & Blynk.
We begin to enter the world of the IoT, starting to remote simple LEDs.
Components Used *Arduino UNO *ESP8266 *Ultrasonic Sensor *LDR Module *5v-Relay(4-Qty) * Level Sensor *LM35
A magnetic sensor sends notification to the phone when you forget to close the fridge door.
A small device for controlling RGB strips over the internet. The system is based on the NodeMCU using Blynk for remote control.