A small device for controlling RGB strips over the internet. The system is based on the NodeMCU using Blynk for remote control.
IOT Controlled 4Bit NeoPixel Desk lamp is operated using the very simple Blynk platform and Esp8266 based nodemcu.
Have you ever dreamed to turn on or off your Christmas tree lights with just your voice? if the answer is "yes", just read this article.
An assignment for my school project
Use Particle Argons, Blynk IoT app, and a motion sensor to activate and change colors of an LED light strip.
How To make Simple Home Automation System
Hii Friends Today I'll Show You How To Make Simple DIY Eclipse Wall Light Using ESP8266 SO LET'S Make It🔥
Easy ways to make DHT With Blynk
Easy ways to make Servo with Blynk app
Coding is so FUN! you can make a smart parking in your house!
You can now know are there are empty slots for your vehicles
Led With Blynk In Easy Ways
A simple home automation project allows you to control home appliance from anywhere. Blynk provides very good and attractive interface.
Hi, my name is Rohan Barnwal welcome back in this project I teach you how you can create a device which help us in stop spreading of Corona
This is an iot based smart energy meter that I made it can monitor power, current, watt hour and unit energy consumed by the device
This project is about an IoT setup for a TV RGB backlight that can be controlled by Blynk App.
You can control your home light or any appliances from anywhere and anyplace
You will never have to find your light switch again in the night, just walk into your bathroom and lights are on.
Create a beautiful home lamp that looks great and also is smart and customizable with HARDWARIO IoT Kit. It is really easy to make.
Make use of Samsung Gear Blynk widget to control LED strip that can light up your room. Thanks to HARDWARIO IoT kit it's easy to make.
If you want a NodeMCU device that could help you to control all your house electrical devices, then this will be your best guide
Using Arduino UNO GSM SIM800 SIM network to remotely control any Arduino with Blynk app. Share schematic + gerber file + BomList
An ultimate tutorial for beginners on how to connect and use an ESP8266 via Arduino and program it to blink an LED using the Blynk app.
It will start your water motor automatically and stop automatically. Also showing how much fill with water in cm.