We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.
It's difficult to make communication with ESP-01 module but today I'll show how to do it in the simplest way.
An ultimate tutorial for beginners on how to connect and use an ESP8266 via Arduino and program it to blink an LED using the Blynk app.
In this tutorial, we will learn how to control an Arduino with the help of Blynk App and ESP8266 WiFi Module. This project is quite simple!
This is a tutorial to show you how to connect to Blynk using an ESP8266 - 01 as an Arduino Uno wifi shield.
Never miss anyone at your door! A system that notifies your phone and email whenever someone presses the doorbell.
Control and monitor the home environment using Android app with advanced features such as voice command, scheduling, home preparing itself.
Smart Garden is a plant environmental monitoring system.
This tutorial shows how to flash firmware on the ESP8266-01. Also how to connect the ESP8266-01/Arduino to Blynk.
A method in which waste management is automated. An innovative system that will help keep the city clean and healthy
This health band can assist old people in their daily lives, leaving the family stress free!
A smartwatch with fall and location detection, reminders and more, designed to help you or your loved one with Alzheimer's!
Interfacing ultrasonic sensor with NodeMCU and displaying the distance in the Blynk app.
A system that tells you about the parking slots of an area.
Build an Android or iOS app for your hardware with no coding!
This project shows how to connect a DHT11 sensor with a NodeMCU and check temperature/humidity.
A project that displays the temperature and humidity of a room on your mobile in real time.
Here's an introduction to control a Nema 17 stepper motor with the help of the Adafruit TB6612 OR A4988 Stepstick OR PHPoC PES-2405 R2
An internet-connected, servo-driven deadbolt actuator that can be operated remotely using a smartphone.
Protect your valuables with a puzzle!
Control home appliances over internet. This IOT project done using Node MCU ESP8266 and BLYNK app. Control devices from anywhere.
Life Band monitors the health conditions of elderly up to date and provide immediate medical assistance if necessary.
Control your LED on Arduino UNO using Blynk App.
A DHT11 connected to Blynk to read data