Whole house energy monitor that monitors a split phase 120/240 service and publishes to blynk.
Make an IoT-based Smart Home with Blynk 2.0 using ESP32 to control 8 home appliances with real-time feedback & No Wi-Fi control.
Main Door Security System with keypad and MLX90614. LEDs are operated by 3 modes (manually + IR + Blynk) & a water level indicator system.
Make an IoT-based Smart Home with Blynk 2.0 using NodeMCU ESP8266 to control 4 home appliances with real-time feedback & No Wi-Fi control.
Now get your alerts & updates about home, wherever you are, with an SMS on your mobile! All with a simple NodeMCU project!
This project focuses on monitoring things over the internet using sensors connected to Arduino with Wi-Fi connection through ESP8266
An Alexa supported water level indicator that allows you to get status of your current water level in the tank by just asking Amazon Alexa
IoT-based Smart Home Automation using the new Blynk 2.0, ESP32 LDR & DHT11 sensor to control 8 relays from mobile, IR remote & switches.
This tutorial is for making DIY automated driveway gates for relatively cheap using Arduino, ESP8266, Raspberry Pi, and Blynk!
This tutorial shows how to ON/OFF Water pump with Magicbit(ESP32) and Blynk App.
This device is an IoT based door lock that can be controlled through the cloud from anywhere around the world on android as well as ios
How to make an IoT-based Smart Home with Blynk 2.0 using NodeMCU ESP8266 to control 4 home appliances with real-time feedback.
Here, I am explaining you How to Control your lights, fans or other things using Mobile Phone over Bluetooth. Come Let's See
Real-time visibility and control of water, Nitrogen-Phosphorus-Potassium - from any where an Internet of Things (IoT) based system.
Make IoT-based Smart Home Automation Using Blynk & ESP32 to control an 8-channel relay module from the IR Remote, manual switch & Wi-Fi.
Control the position of a microphone stand remotely through Blynk.
A system that closes my closet door using a servo motor and an Particle Argon
Make IoT-based Smart Home Automation using Multiple ESP32 & NodeMCU network to control all the home appliances from the Switches & Blynk App
Stopping my humidifier from working by drowning it via servo when it is no longer dark or when I want.
Too lazy to turn on your speakers? Too forgetful to turn them off? Look no further, as this project will automate all of your worries away!
Make IoT-based Smart Home Automation using Multiple NodeMCU ESP8266 network to control all the home appliances from the pushbuttons & Blynk.
Simple project for motitoring internal - external home enviromental conditions, motion, fire detection and controling 4 appliences with app
Control 8 relays with WiFI + Bluetooth + Manual Switch using ESP32 and Blynk App. Explained with circuit & source code.
First step towards Home automation