In this project, we're going to make a keyless door lock system that uses a 4X4 keypad to enter the keys and a servo motor to open or close.
Particle Photon circuit allowing the display of environmental conditions (light, temperature, humidity, pressure) using the Blynk app.
In this easy project we'll connect a temperature and humidity sensor to an Arduino Uno with an Ethernet Shield and we'll use Blynk.
This tutorial will help you to learn DHT11/DHT22 interfacing with nodeMCU and sending its data to Blynk Application.
With this project, we will be able to water our plant automatically and monitor it from our smartphone.
Use the Arduino101 Bluetooth wireless interface to read the Intertial Measurement Unit (IMU) with your phone or tablet using Blynk !
Monitor pressure, humidity, and temperature over WiFi with an AA battery-sized device.
Using PSoC and LinkIt ONE send analog sensor values to Blynk and then, with the power of IFTTT control your smart devices based on the data!
A solution to measure noise level and sound pollution in urban areas.
In this project, you can view the temperature and humidity in your room wherever you are.
The bird house will be outfitted with IOT to track what kind of conditions attracts guests and will tweet you when they are at the door!
A new way to connect sensors! Connect up to five sensors to the particle powered WiSor and obtain real-time data on your mobile phone!
In this tutorial you will learn how to set up a weather station based on ESP32, and how to monitor its readings remotely, via the Blynk app.
We will learn how to make a fire alarm system using NodeMCUESP8266. This IoT based project detects the nearby flame & informs us.
If you have ever wondered how to get started in the IoT (Internet of Things) world, this is the tutorial for you!
A monitoring station for my off-grid greenhouse. Multiple environmental parameters, WiFi, solar-powered, cloud connectivity.
IOT application with MKR1000 and ENV shield just 2 components with them we can get (Temp, Lux, Hum, UV) values from everywhere
Here I have made prototype of smart home. In this Smart home project I have used Arduino and Node Mcu to control the Hardware parts.
Sending The Data From The LoRa Modules To Blynk Servers Using Ai-Thinker LoRa Modules
Turn on a fan automatically with a Particle Photon using temperature sensing and the Blynk app.
In this project, I'm using a Kortex A1 IoT-sensor microcontroller in order to monitor temperature/humidity/pressure/altitude via WiFi.
A smart scarecrow on the field to keep a track of climatic condition. For need of irrigation/pesticides a drone will be sent to the field.
Micro Gear Motor based small robot powered by a Wemos D32 Pro and controlled by Blynk app.
That is a coding